Water Connection; Connecting The Water Supply For The Ct 3Xxx Toilet; Water Connection For The Cts 3Xxx, Ctw 3Xxx And Ctlp 3Xxx Models - DOM CT 3110 Instrucciones De Instalación

4.4

Water connection

The water supply is connected via a module
(Fig. 10) where the water feed hose is atta-
ched. The fresh water tank is linked at con-
nection "1". The toilet flush is provided via
connection "2". Install the water connection
module on the vehicle's wall in an accessible
position (Fig. 24). Wall holder "3" serves to
absorb a module and an optional water tank.
3
2
Fit all hose connections with ring clamps and
then check leak tightness.
4.4.1 Connecting the water supply for
the CT 3xxx toilet
Always install the water connection module
above the toilet's highest water level (h = min.
50 mm).
CAUTION!
If the water connection module is installed
below the water level, there is a risk of foul
water flowing back into the tank.
4.4.2 Water connection for the CTS
3xxx, CTW 3xxx, CTLP 3xxx models
The water supply is connected in the same
way as with the CT 3xxx model via a module
(Fig. 22). The water connection module is
already installed in the console. The CTW 3xxx
model with the integrated water tank already
contains the electric water pump and the filling
1
nozzles for external fresh water supply.
Fig. 23
h
Fig. 24
13
Installing the toilet