Installing The Service Door; Create Wall Aperture; Installing The Toilet - DOM CT 3110 Instrucciones De Instalación

Installing the toilet

4.0 Installing the toilet
4.1

Installing the service door

The description for the installation of the service
door can be found in the document supplied
(Dometic Seitz SK 5) (optional/depending on
model).
4.2

Create wall aperture

Apply an aperture for the cassette in the wall
with the dimensions y min
mm; w = 310 mm and h = 360 mm. The x value
results from the toilet installation. Observe the
position of the service door.
=12.5 mm and y max = 28
Fig. 4
4.3 Installing the toilet
CAUTION!
All components of the system must be instal-
led in frost-protected areas. In minus tempe-
ratures there is a risk of damage due to frost.
Install the toilet according to the description of
the respective model. Allow sufficient space so
as not to limit the operation of the emptying
valve.
Install the toilet against an upright wall only.
When installing the toilet in a wet room, we
recommend connecting the toilet with the sho-
wer tub. The toilet pedestal is fitted with a pro-
jecting flange in order to cover the top rim of the
shower tub.
8
Fig. 5