Conceptronic CBTGPS Guía De Instalación Rápida página 14

ENGLISH
3.2 LED explanation
The Bluetooth® GPS Receiver has three LED lights, one is Bluetooth® Status LED,
the second one is Battery Status LED and the third one is GPS Status LED. The status
table of the LED is shown below:
Category SYMBOL
Bluetooth®
Status LED
Battery
Status LED
GPS Status
LED
* The CBTGPS supports "fuzzy auto on/off". It will automatically enter sleeping
mode after turning off the Bluetooth® connectivity.
With fuzzy auto on/off, if the connection between your device and the CBTGPS is
successful, the GPS Receiver will wake up itself. The blue LED of the GPS Receiver
will quickly blink (every 1 sec) and the orange LED of the GPS Receiver will also be
on.
COLOR STATUS
Blue Always on:
Slowly
blinking:
Quickly
blinking:
Red Blinking:
Green Light On:
Green Blinking:
Orange Always on:
Blinking:
14
Function
Not connected
Sleeping mode *
Bluetooth® is connected and
ready for data transmission
The battery is empty
The battery is charging
The battery is fully charged
Acquiring satellites, GPS position
not fixed
GPS position is fixed, Navigation