Conceptronic CBTGPS Guía De Instalación Rápida página 17

ENGLISH
When searching for new Bluetooth® Devices, you will find the GPS Receiver with
the name "CBTGPS". During the pairing process, you will be asked for a PIN-Code.
Note: The PIN-Code for the GPS Receiver is "0000".
This PIN-Code cannot be changed!
When the pairing process is completed you are able to connect to the GPS Receiver
through the Serial Port Profile (SPP).
When the connection between your device and the GPS Receiver is successful, the
blue LED of the CBTGPS will blink.
Note: When the GPS Receiver is in use by a Smartphone or PDA, it cannot be
paired with another device. You need to disconnect first before the GPS
Receiver can accept a new pairing process.
5. Using the CBTGPS in your Navigation Software
The CBTGPS can be used with a variety of navigation applications: Tom-Tom®,
Route® 66, Microsoft® Auto-Route™ 2006 and others are supported. For instructions
how-to connect to a GPS Receiver through your navigation application, please refer
to the manual of the navigation application.
Note: Most navigation applications can auto-detect the GPS Receiver through the
options menu. When you need to add the GPS Receiver manually, use the
following settings:
COM-Port
Baud-Rate
: (COM-Port assigned by your Smart Phone/PDA)
: 4800 ~ 115200
17