SAFETY PRECAUTIONS
•The maximum allowed lifting limit is
around 180 kg. Do not exceed this wei-
ght.
• Always ensure that the bed is used
within the correct electrical voltage
range. Unless otherwise requested, beds
are manufactured 220-240v rated and
should be used with the same rated su-
pply.
• When the bed is placed for use, always
ensure that the power cord is in such
a way, that it will not get caught in the
moving parts or jammed under the whe-
els of the bed (if fitted) or any other little
piece of furniture nearby.
.The bed is not recommended for wet
or high humidity environments such as
hydrotherapy rooms. Any prolonged ex-
posure to high moisture conditions may
affect the electrical components and
may result in failure.
•Always disconnect the bed from the
power supply before inspection. Children
are not allowed to use the bed or be near
the equipment while it is on use. Do not
leave children unsupervised near the
bed.
•Always take care to avoid anyone sitting
on the head or leg parts of the bed since
this will cause damage to the bed and
its electronic, hydraulic and mechanical
functions.
•When lifting your bed for moving it,
always lift by the metal frame beneath
the casing at each side. Unplug it prior to
any movement. 2 or more persons should
move the bed due to its size and weight.
USING YOUR BED
If you purchased 2235B.3.A26, your bed
is equipped with 3 engines that adjust
height, backrest and seat inclination.
The footrest is adjustable by gas lift.
EN
If you purchased 2235D.4.A26 your bed
is equipped with 4 engines that adjust
height,backrest, seat inclination and
legrest.
ROCKER SWITCHES
A rocker switch is a easy-to-use button
which highligths for its reliability. It's an
on-off switch that rocks back and forth
like a see-saw. They are placed at the
backrest, seat and foot part (4-engine
bed) of the bed. By pressing the buttons,
you can adjust all the movements of the
bed.
© 2020 Weelko
www.weelko.com
Importer: Weelko Barcelona, S.L.
ESB65397556