Blaupunkt VIO-HP20 Guia De Inicio Rapido página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Smart Human detection
To enable / disable this feature go to: Camera dashboard --> settings icon --> Arm
Setting --> Human Shape Detection. Once enabled, the camera will trigger push
notifications only if the detected object has a human shape, decreasing the false alarms
from cars or animals.
Motion detection zones
To adjust the detection area which is
enabled for motion detection go to:
Camera dashboard --> settings icon
Arm Setting --> Detection region setting
By default the motion zone covers the
camera vision field completely.
To delete all the previously selected
detection zones, tap on the "Clear" icon. To
delete specific areas tap the "Eraser" icon
and slide your finger through the screen.
Tap again the "Eraser" icon to exit eraser
mode. To create a new detection zone tap
on the screen and draw a motion detection
zone. Create as many motion zones as
needed, then tap "Save" to save the motion
zones.
Smart tracking
To enable / disable this feature go to: Camera dashboard --> settings icon --> Arm
Setting --> Smart tracking. Once enabled, the camera will automatically follow the
moving object.
Audio detection alarm
To enable / disable motion detection go to:
Camera dashboard --> settings icon --> Abnormal
Sound Alarm. Then tap on "decibel settings" to set
the noise threshold to trigger the audio detection
alarm.
Note: Audio detection alarm detection its disabled
by default.
8
-->
Clear
Invert
Eraser

Publicidad

Tabla de contenido
loading

Tabla de contenido