Zwilling ENFINIGY 53102 Manual De Instrucciones página 27

GB
7
Setting the tea timer
To activate the tea timer and set an individual steeping time, the keep warm function must be
active beforehand. This ensures that the desired water temperature is kept constant during the
steeping time. Hold the keep warm button
display, plus and minus button
brewing time via the plus respectively the minus button (max. 10 min). The timer starts counting
backwards in seconds. A beep sounds again, when the timer is
fi nished. After the tea timer has been turned off , the keep warm
function restarts for 30 minutes.
Keep warm function
active
8
Pre-boiling
Press the cooking function
ature. Both symbols start blinking. The water will be heated up to 100 °C and then cools down
to the preset temperature (beep sounds).
www.zwilling.com
pressed for 2 seconds. A beep sounds. Timer
are now visible on the control panel. Set the desired tea
1.
2 Sek.
on the control panel, then press the button of your desired temper-
1.
2.
18
2.
/
18
Operation
26