On-Off Switch; Basic Operation; Advanced Operation - Klip Xtreme LiteBlast KHS-659 Manual Del Usuario

1. Adjustable headband
2. Multicolor LED light effects: They function in Bluetooth
auxiliary mode, the lights are disabled.

3. On-Off switch

4. Built-in microphone: For hands-free calling and conferencing.
5. Status indicator light:
•Alternating green and blue LED indicates that the headset has entered into
the pairing mode.
•The LED turns solid blue when the wireless connection has been
established or during a call.
•The blue LED blinks slowly while streaming music via Bluetooth
•The LED turns solid red while charging.
6. Charging socket: insert the micro-USB plug here to recharge the battery.
7. 3.5mm input jack: Use it for wired playback. When an auxiliary cable is
connected, the Bluetooth mode is disabled automatically. You must slide the
®
power switch back to its off position and then back on again to turn on the
unit after removing the stereo cable from the headset.
8. Previous track/Volume down
volume level. Press and hold to play the previous track.
+/
9. Next track/Volume up : Briefly press this button to increase the
volume level (when the maximum level is reached, the headset will generate
a short beep). Press and hold to play the next track.
10. Play/Pause and handset button
In hands free mode, press this button to answer and end a call.
mode. In
®
.
®
/-
: Briefly press this button to decrease the
/ :
Press and hold to reject incoming calls.
Press twice to dial the last number called (on supported devices).
In playback mode, touch this button to pause your music, or to resume
listening when a call has ended.
11. Light switch: Press and hold this button to switch the LED light mode
on and off.
IV. Basic operation
Charge your headset
•Plug the supplied USB cable into the USB port of your computer or to a 5V
USB adapter to charge the battery.
•Make sure that the headset is fully charged before using it for the first time.
•The headset battery has to be initially charged for at least 2 hours. Thereafter,
the battery will take from 1 to 2 hours to recharge.
•While the headset is being charged, the LED glows red.
•When the battery has reached full capacity, the LED turns off.
•Turn the headset off when not in use to save battery.
V. Advanced operation
Note:
Before installing this product, please make sure your computer or laptop has the
built-in Bluetooth feature available. If your computer is not Bluetooth
®
you must purchase a compatible dongle, preferably version 3.0 or above.
-enabled,
®