Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing the headset with your mobile phone
1. Slide the power switch on the headset to turn on the device.
2. Next, set your Bluetooth
phone to "discover" the wireless headset.
®
3. Place both devices not more than one meter away from each other.
4. The LED blinks green and blue alternatively to indicate that the headset has
entered into the pairing mode and it is ready to be detectable for the first
time.
5. On your mobile phone, tap the newly discovered audio device (KHS-659)
being displayed in the Bluetooth
®
6. When the headset asks if you want to pair with it, click Yes or Ok to accept.
7. If you have a lower Bluetooth
version, you may be prompted to enter the
®
passkey 0000 (4 zeros).
8. If pairing is successful, a tone will be heard and the LED will turn solid blue. If
after 60 seconds the pairing process fails, please repeat steps 1 through 7
described above.
9. The headset will go automatically into standby mode after several minutes of
inactivity.
Using the wireless headset
1. Answering and ending a call using your mobile phone
• When there is an incoming call, briefly press the Handset
• You may also press the answer button on your cellular phone to take the call.
• To end a call, simply press the Handset
finish the call directly using the end key on your cell phone.
• To reject or ignore an incoming call, press and hold the Handset
1 to 3 seconds.
• If you want to redial the last number called, quickly press the Handset
list.
button to pick it up.
once again. Likewise, you may also
button for
twice.
2. Music playback
• Briefly press the
• Press and hold the
listen to.
• Press briefly the
level on the headset.
• When listening to music using your mobile phone, playback will pause to allow
the call to go through.
• As soon as you hang up, music playback will resume automatically.
• When listening to music via the auxiliary input, use the controls from your
mobile device to manage all playback functions.
button
button to reproduce and stop audio playback.
+/
/-
and
buttons to choose the track you want to
+/
/-
and
buttons to increase or decrease the audio
Publicidad
Tabla de contenido
