Dri-Eaz Jet CXV F367 Manual De Instrucciones página 3

MAINTENANCE:
Removing and reinstalling the fan assembly
CLEAN EXTERIOR: Clean the housing with a damp cloth.
Restore the original shine with a vinyl cleaner/polish used on
automobile plastics.
Monthly
INSPECT ELECTRICAL SYSTEM: Inspect the electrical cord
for damage at regular intervals. Periodically, remove the
housing and inspect internal wiring for bare wires, insecure
fasteners, and discoloration. Remove and repair any damaged
wiring as needed. Failure to do so may lead to electrical shock
or a fire hazard.
WARNING! Damaged wiring can cause electric shock or fire
hazard.
MOTOR BEARINGS: The bearings on all Dri-Eaz airmovers
are permanently lubricated. No maintenance is required.
07-01568C F367-115V
SPECIFICATIONS
Model
Weight
Power
Amp
Control
Operating positions
Dimensions (H × D)
Cord length
Construction
Safety
Specifications are subject to change without notice. Some values may be
approximate.
FOR PARTS AND SERVICE CALL YOUR LOCAL DRI-EAZ
DISTRIBUTOR
3
F367
35 lbs. | 16 kg
345 W, .25 HP
1.5, 2.0, 3.0 amps
Recessed 3-speed rotary switch
2
25.9 × 18.9 in. | 65.8 × 48 cm
25 ft. | 7.62 m
Rotomolded shell
ETL tested to UL/CSA standards
Dri-Eaz Products, Inc.