Specifications; Technical Specifications; Troubleshooting - Furrion Access FAN17A82 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Specifications

FREQUENCY RANGE (WI-FI)
SUPPORTED SYSTEMS
INTERNAL LAN WI-FI
INTERNAL GPS/GLONASS
TX POWER WI-FI (WAN / LAN) 2.4G Wi-Fi: 17.78dBm (max.)
WI-FI ROUTER
POWER RATING
OPERATION TEMPERATURE

Troubleshooting

1. None of the LEDs are on when you turn on the router
Make sure you have power to the Ceiling Mount Bracket.
Check the connection between the Ceiling Mount Bracket and the Wi-Fi Router.
If the error persists, you may have a hardware problem. In this case you should
contact technical support.
2. You have forgotten your router login and/or password
Try the default login and password, found in the "Login" section. If this fails, you
can restore your router to its factory settings by pressing and holding the Reset
button on top of your router with a pointed object for 10 seconds or more. You will
be able to use the default login and password after the factory reset.
3. No access to the Internet
Check the external network access status and Wi-Fi connection.
14

Technical Specifications

OPERATING CONDITIONS
2412MHz to 2462MHz (802.11b/g/n (HT20))
2422MHz to 2452MHz (802.11n (HT40)
Wi-Fi (LAN): 802.11b/g/n
ANTENNA GAIN
2dBi
2dBi
>400ft with >10Mbps throughput
Typical: 12Vdc @ 500mA, Peak 1A
-20°C to 55°C / -4°F to 131°F

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido