Wi-Fi Router Configuration; Power On Your Wi-Fi Router; Connect To Your Wi-Fi Router For Wi-Fi Configuration; Log In To The Configuration Interface - Furrion Access FAN17A82 Manual De Instrucciones

Wi-Fi Router Configuration

Power on Your Wi-Fi Router

Turn on the power connected to the
Ceiling Mount Bracket.
The Wi-Fi Router will be turned on
automatically upon receiving power.
NOTE: You may log in to the Wi-Fi
Router and disable the auto power-on
feature through the configuration
interface. The default setting is Enabled.
If the Wi-Fi Router is turned off, press
and hold the POWER button on the top
for about 4 seconds to turn it on.
Connect to Your Wi-Fi Router
for Wi-Fi Configuration
1. Scan for wireless networks on your
mobile device or laptop. It may take
a few minutes for the network to
appear.
2. Select Local Wi-Fi network with
SSID: FURRIONAP_xxxxxx
Password: FAxxxxxx
The "xxxxxx" in the example above
corresponds to the last 6 characters
of the unique network ID address. The
default password can be found on the
SSID/WPA sticker.
3. Confirm and join the network.
8
Log in to the Configuration
Interface
The default IP of this Wi-Fi Router is
192.168.0.1 with subnet 255.255.255.0.
Make sure the smart device or PC
attached to this router is in the
same subnet and has an IP address
in the range between 192.168.0.2~
192.168.0.254.
1. Launch a web browser and enter
192.168.0.1 in the address bar, then
the login window will pop up.
2. Enter the default user name: admin
and password: admin.
Username:
Password:
Login
3. Click Login.
System Icon Definition
Reboot the system.
Click to logout of the system.
Click for quick setup of your
system.
Cancel