Getting Started; Important; Setup Wizard - Furrion FEHD19S0A Manual De Instrucciones

Getting Started

The Setup Wizard window appears the first
time you turn on the TV. It will assist you
to configure the TV and scan for available
channels.
IMPORTANT: Make sure the antenna or cable
TV system connection is made.
1. Press POWER button on the TV control
panel or button on the remote control
to switch on the TV. The power indicator
will change to green. The Setup Wizard
window appears on the screen.
NOTE: It may take a few seconds before
the Setup Wizard window appears on the
screen.
2. Use or keys to check Home Mode
(Energy Saving) or Retail Mode. Press OK
to enter the next menu.
3. Use or keys to check Yes or No.
Press OK to enter the next menu or press
MENU to return to the previous menu.
4. Use , , or
select your desired settings.

Setup Wizard

or
Use
Menu
Language, then press
Language
English, French or Spanish.
or
Use
Air/Cable
Cable, then press
or Cable.
or
Use
System, then press
Cable
Auto, STD, IRC or HRC.
System
NOTE: Only adjustable after set "Air/
Cable" as "Cable" mode.
or
Use
Scan, then press OK or
Auto Scan
memorizing all the channels available
in your area.
NOTE: You may press EXIT at any time to exit
the menu.
keys to navigate and
keys to highlight Menu
or to select
keys to highlight Air/
or to select Air
keys to highlight Cable
or to select
keys to highlight Auto
to start
14