Pc Settings - Furrion FDFS55C1A Manual De Instrucciones

Change Settings

PC Settings

The PC menu is only accessible when a PC is connected to the TV via the VGA connection.
Note: After connecting a PC, press
1. Press MENU button, the setup window will appear on the screen.
key to highlight Setup mode.
2. Use
or
to highlight PC Settings item, then OK
3. Use or
4. Use or to highlight the item you would like to reset, then press
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
H-Pos Configures the horizontal position of the TV image.
V-Pos Configures the vertical position of the TV image.
Clock
Adjusts the pixel Clock (vertical) for a clearer image.
Phase Adjusts the phase Clock (horizontal) for a clearer image.
Auto Automatically adjusts the PC settings.
PC MONITOR DISPLAY MODES
Mode Resolution
VGA
640 X 480
VGA
720 X 400
VGA 1366 X 768
SVGA 800 X 600
XGA
1024 X 768
*Please note that on non FHD TVs some functionality may be limited.
button and select PC. Press OK
SOURCE
PC Menu
Refresh Rate
60 / 75 Hz
70 Hz
60 Hz
60 / 75 Hz
60 / 70 Hz / 75 Hz
to enter, PC Menu table.
or
or
Press or to move the screen horizontally
Press or to move the screen vertically
Press or to adjust
Press or to adjust
Press OK or to adjust all PC settings
automatically.
PC MONITOR DISPLAY MODES
WXGA 1280 X 720
WXGA 1360 X 768
SXGA 1280 X 1024
WXGA+
1440 X 900
WSXGA+
1680 X 1050
FHD 1920 X 1080
to enter.
or
to select the settings.
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
22