Pc Settings - Furrion Aurora FDUP43CBR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TV Settings

PC Settings

The PC menu is only accessible when a PC is connected to the TV via the VGA connection.
Press Source button to select VGA as the input source.
1. Press MENU button, the setup window will appear on the screen.
2. Use
or
to highlight Setup mode.
3. Use
or
to highlight Advanced, then press OK or
4. Use
or
to highlight the item you would like to reset, then press
settings.
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
H-Pos
Configure the horizontal position of the TV image.
V-Pos
Configure the vertical position of the TV image.
Clock
Adjust the pixel Clock (vertical )for a clearer image.
Adjust the phase Clock (horizontal) for a clearer
Phase
image.
Auto
Automatically adjust the PC settings.
PC MONITOR DISPLAY MODES
Mode
Resolution
VGA
640 x 480
VGA
720 x 400
VGA
1366 x 768
SVGA
800 x 600
XGA
1024 x 768
WXGA
1280 x 720
Advanced Sub-Menu
Refresh Rate
60/75 Hz
70 Hz
60Hz
60/75 Hz
60/70/75 Hz
60 Hz
to enter the sub menu.
Press
or
to move the screen horizontally.
Press
or
to move the screen vertically.
Press
or
to adjust the pixel clock vertically.
Press
or
to adjust the phase clock horizontally.
Press OK or
to adjust all PC settings automatically.
PC MONITOR DISPLAY MODES
Mode
Resolution
WXGA
1360 x 768
SXGA
1280 x 1024
WXGA+
1440 x 900
WSXGA+
1680 x 1050
FHD
1920 x 1080
or
to select the
Refresh Rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
31

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido