Weinmann & Schanz DRAIN-UNIT Manual De Instrucciones página 11

Fixing to the wall:
1. Insert the fixing bolts to attach the metal
tank bracket.
2. Fix the mounting plates on the wall.
3. Position the insulating base of the housing
by inserting the two threaded rods through
the holes in the base*.
3
4. Enter the separation tank into the left cavity
by inserting the threaded rods through the
fins of the tank. Once inserted, use the nuts
to completely fix this section.
In 16 litres separation systems join the two
separators with the join pipes provided, at
the top and bottom part.
5. Position the return line (with pump), and
position it on the right side of the base
housing.
6. Fix the bracket of the return line aligned
with the slot of the plate with the dent for
the branch below the drain valve.
*N.b.: with respect to those with integrated control, disconnect the voltage and PWM signal cables reaching the pump and reconnect
them on positioning the insulating cover.
2
4
6
11
Fixing points