Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION (cont.)
4. LT161 & LT162: Apply 2 beads of adhesive caulk (not provided) on the
bottom surface of the lavatory. Apply the first bead approx. 1/4" from the
outside edge. Apply the second bead about 5/8" from the first bead.
LT163, LT185 & LT480(G): Apply a bead of adhesive caulk on the bottom
surface of the lavatory. See illustration.
LT161 & LT162
LT185
5. Carefully set the lavatory on the counter top.
6. Lightly press on the lavatory to set the adhesive caulk. Wipe away any
excess and fill voids as necessary.
7. Allow adhesive to set per manufacturer's instructions.
8. Finish up the faucet and drain connections.
9. Run water into the lavatory and check for leaks.
LT163
Adhesive
Caulk
LT480(G)
Adhesive
Caulk
3
Adhesive
Caulk
Adhesive
Caulk
Publicidad
