SOUNDMASTER RR18SW Manual De Instrucciones página 10

1. Set the Function switch to the "TAPE/OFF" position.
2. Insert the prerecorded cassette into the cassette tray, and press the "PLAY" button.
3. To fast forward, press the "FAST FORWARD" button in. To stop fast forwarding and return
to the playback mode, press the "PLAY" button.
4. To rewind, press the "FAST REWIND" button in. To stop rewinding and return to the
playback mode, press the "PLAY" button.
5. To stop the playback, press the "STOP/EJECT" button once. To eject the cassette, press the
"STOP/EJECT" button again.
Note: Remove the cassette from the cassette holder when it is not in use.
Note: To prevent accidental recording,
break off the cassette tab from side A or
side B.
MICROPHONE to TAPE
1. Set the Function switch to the "TAPE/OFF" position
2. Insert a cassette tape and press the "RECORD" button to record the sounds through the
microphone.
3. To pause the recoding, press the "PAUSE" button.
4. To stop the recording, press the "STOP/EJECT" button.
RADIO to TAPE
1. Set the Function switch to the "RADIO" position
2. Insert a cassette tape, and press the "RECORD" button to record the sounds from the radio.
3. To record, press the "RECORD" button to start recording.
4. To pause the recoding, press the "PAUSE" button.
5. To stop the recording, press the "STOP/EJECT" button.
USB/SD to TAPE
1. Set the Function switch to the "USB" position
2. Insert a cassette tape, and press the "RECORD" button to record the sounds from USB/SD.
3. To pause the recoding, press the "PAUSE" button.
4. To stop the recording, press the "STOP/EJECT" button.
CASSETTE OPERATION
CASSETTE RECODING
Tab for side B
3
RR18 / English Instruction Manual
Side A
Tab for side A