Quick Reference Guide For Programming - Hobby Biotherm Pro Instrucciones De Uso

4. Quick reference guide for programming

Switching to program mode:
Switching to operating mode:
Cancel programming:
Backlighting:
Manual deactivation of an audio signal: An audible alarm signal can be deactivated pressing any key. The audio
Manual activation/deactivation:
Pressing the button while in operating mode will activate the
program mode.
Having completed your settings in program mode, you can return to
operating mode by pressing the
is pressed for 90 seconds, the system automatically switches back from
program to operating mode. Programmed values are saved.
If you want to cancel all changed values please unplug device before
returning to operating mode. Changed values will not be saved.
It is possible to toggle between permanent illumination of the display and
automatic deactivation of illumination. Press and hold the ▲ button in
operating mode and then press Taste ▼. If the illumination is switched off
and the device beeps twice, the display illumination is in automatic mode
(backlighting is automatically switched off after 120 seconds of inactivity).
When the backlighting is turned on and you hear a single beep, it will
remain permanently on.
signal will only sound again when thenext deviation from the programmed
desired value is detected.
Both slots can be turned on and off manually. To activate slot 1 (
then press . Press these buttons a second time, slot 1 (
deactivated. If you press it a third time, program mode for slot 1 (
reactivated. The second line in the display indicates "on", "OFF" or the
temperature value you programmed. To activate slot 2 (
press . Press these buttons a second time, slot 2 (
If you press it a third time, program mode for slot 2(
third line in the display indicates "on", "OFF" or your programmed
temperature value. If slot 2 (
controlled, "P ON" or "P OFF" appears on the display indicating
permanently ON or OFF.
button for 3 seconds. If no button
) is time-controlled and not temperature-
), hold ▲,
) is
) is
), hold ▲, then
) is deactivated.
) is reactivated. The
7