10 Warranty; 11 Declaration Of Conformity - Protool MXP 1000 E EF Manual Original

10 Warranty

For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states, the
warranty period is 24 months (verifi cation through
invoice or delivery note).
Damage caused by, in particular, natural wear, over-
loading, incorrect handling, or damage caused by
the operator, or damage caused through use of the
equipment contrary that specifi ed in the Operat-
ing Instructions, or damage which was known at
the time of purchase, is not covered by the war-
ranty. Furthermore, damage caused by the use of
non-original PROTOOL accessories and consumable
material (e.g. sanding pads) is also excluded.
Complaints can only be recognised if the tool is
returned while still assembled to the supplier or an
authorised PROTOOL Customer Service workshop.
Keep the Operating Instructions, Safety Instruc-
tions, Spare Parts List and purchase receipt in a
safe place. Otherwise the respective, current war-
ranty conditions of the manufacturer shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the tech-
nical content of this documentation.

11 Declaration of Conformity

Stirrer
MXP 1000 E EF
MXP 1002 E EF
MXP 1200 E EF
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents:
EN 50 366, EN 55 014-1, EN 55 014-2, EN 60 745-1,
EN 61 000-3-2, EN 61 000-3-3 according to the
provision of the regulations stipulated in Directive
2006/42/EC, 2004/108/EC.
All the procedures were applied as validly amended
at the time of the issue of this declaration, without
quoting these.
Technical documentation is kept at the manufac-
turer.
11
Stanislav Jakeš
Research and development
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
2. 5. 2011
Serial no.
779900, 765917
764150, 764925
764151, 764933
15