Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
MV-TILT4B INSTALLATION INSTRUCTIONS
Important Notes
• Supports a maximum load of 200 lbs. (91kg)
• Ideal for flat panel displays from 55" - 75"
• VESA MAX hole pattern: 600mm x 810mm
• Tilt adjustment -5 / +15 degrees; Slide lateral adjustment
• The manufacturer does not accept responsibility for incorrect installation
Component Checklist
Wall Plate
TOOLS REQUIRED:
Power Drill
10mm or 6mm Drill Bit
Phillips Head Screw Driver
Spirit Level
13mm(1/2") Socket Wrench
or Shifter
Mounting the Wall Plate
Masonry Wall
Note:Ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
1-Left monitor
bracket-(BB)
1-Right monitor
bracket-(CC)
Security Bracket
TIP:Use a spirit
level to ensure the
Wall Plate is
horizontal
3
10mm(
/
") Hole
8
Masonry
Wall Plug
Washer
Flange Screw
Bits Bag
Masonry Wall
Flange
Screw(x4)
¢12.7x¢6.0x12.7mm
Multi Washer(x4)
Spacer(x4)
Mounting Screws
M8x15mm / M8x35mm / M8x45mm(x4 each)
M6x15mm / M6x35mm / M6x45mm(x4 each)
M5x15mm / M5x35mm / M5x45mm(x4 each)
M4x15mm / M4x35mm / M4x45mm(x4 each)
Cross Recess Screws
Timber Stud Wall
Note:Ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
6mm(
Washer (x4)
Plug (x4)
¢19x¢8.0x19.4mm
Spacer(x4)
1
/
") Hole
4
Washer
Flange Screw
Publicidad
Manuales relacionados para Mustang MV-TILT4B
Resumen de contenidos para Mustang MV-TILT4B
- Página 1 MV-TILT4B INSTALLATION INSTRUCTIONS Important Notes • Supports a maximum load of 200 lbs. (91kg) • Ideal for flat panel displays from 55” - 75” • VESA MAX hole pattern: 600mm x 810mm • Tilt adjustment -5 / +15 degrees; Slide lateral adjustment •...
- Página 2 Mounting the Display Brackets NOTE: When attaching the mounting Mounting screws to the display.Make sure Screw the direction of Bracket is right M6&M8 and ensure that both brackets Screw Hole Recessed Mounting Holes are vertically alined. Multi Washer If the mounting holes are recessed M4&M5 into the back of the display,use the Screw Hole...
-
Página 3: Liste Des Composantes
MV-TILT4B Manuel d'installation Notes importantes • supporte un poids maximum de 91kgs (200 lb). • écrans plat LCD et Plasma de 55 " à 70 ", réglage de l’inclinaison +5 ° / -15 • Ce produit s'adapte avec des configurations de trous jusqu'à VESA 600x810 •... - Página 4 Montage des supports d'affichage Note : Lors de la fixation de l’écran, s’assurer que les supports sont dans la bonne direction et qu’ils sont alignés verticalement. Mounting Screw M6&M8 Screw Hole Multi Trous de fixation: Washer M4&M5 Si les trous de montage sont encastrés dans Screw Hole le dos de l'écran, utilisez les buissons fournis.
-
Página 5: Lista De Componentes
MV-TILT4B Manual de instalacion Notas Importantes • soporta un peso maximo de 91kgs (200 lbs) • La inclinación de la pared para el montaje es universal de 55 "-75" LCD • El producto es compatible con los modelos y huecos VESA hasta 600 x 810 •... -
Página 6: B Montaje De Pantalla
Montaje de Pantalla NOTA: Al configurar la pantalla, asegurarse que los materiales estén en la dirección correcta y bien alineada verticalmente. Mounting Screw M6&M8 Screw Hole Multi Huecos de Instalacion: Washer M4&M5 Si los huecos de instalación están encajados Screw Hole en la parte posterior de la pantalla, utilice los tornillos Siempre.