Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
MV-TILT3B INSTALLATION INSTRUCTIONS
Country of origin: China Contact number: 866-395-0370 Warranty: 5 years
Important Notes
• Supports a maximum load of 200 lbs. (90.72kg)
• Ideal for flat panel displays from 32" - 55"
• VESA MAX hole pattern: 510mm x 810mm
• Tilt adjustment -5 / +15 degrees; Slide lateral adjustment
• The manufacturer does not accept responsibility for incorrect installation
Component Checklist
Wall Plate
TOOLS REQUIRED:
Power Drill
10mm or 6mm Drill Bit
Phillips Head Screw Driver
Spirit Level
13mm(1/2") Socket Wrench
or Shifter
Mounting the Wall Plate
Masonry Wall
Note: Ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
10mm(
Flange Screw
1-Left monitor
bracket-(BB)
1-Right monitor
bracket-(CC)
Security Bracket
TIP:Use a spirit
level to ensure the
Wall Plate is
horizontal
3
/
") Hole
8
Masonry
Wall Plug
Washer
Bits Bag
Masonry Wall
Flange
Screw(x4)
Plug (x4)
¢12.7x¢6.0x12.7mm
Multi Washer(x4)
Spacer(x4)
Mounting Screws
M8x15mm / M8x35mm / M8x45mm(x4 each)
M6x15mm / M6x35mm / M6x45mm(x4 each)
M5x15mm / M5x35mm / M5x45mm(x4 each)
M4x15mm / M4x35mm / M4x45mm(x4 each)
Cross Recess Screws
Timber Stud Wall
Note: Ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
6mm(
1
/
4
Washer (x4)
¢19x¢8.0x19.4mm
Spacer(x4)
") Hole
Washer
Flange Screw
Publicidad
Manuales relacionados para Mustang MV-TILT3B
Resumen de contenidos para Mustang MV-TILT3B
- Página 1 MV-TILT3B INSTALLATION INSTRUCTIONS Country of origin: China Contact number: 866-395-0370 Warranty: 5 years Important Notes • Supports a maximum load of 200 lbs. (90.72kg) • Ideal for flat panel displays from 32” - 55” • VESA MAX hole pattern: 510mm x 810mm •...
- Página 2 Mounting the Display Brackets NOTE: When attaching the mounting Mounting screws to the display.Make sure Screw the direction of Bracket is right M6&M8 and ensure that both brackets Screw Hole are vertically alined. Recessed Mounting Holes Multi Washer If the mounting holes are recessed M4&M5 into the back of the display,use the Screw Hole...
-
Página 3: Listado De Componentes
MV-TILT3B Manual de instalacion País de origen: China Número de contacto: 866-395-0370 Garantía: 5 años Notas importantes • soporta un peso maximo de 90.72kgs (200 lbs) • La inclinación de la pared para el montaje es universal de 32"- 55" LCD •... - Página 4 Montaje de Pantalla Note : Al configurar la pantalla, asegurarse que los materiales Mounting Screw estén en la dirección correcta M6&M8 y bien alineada verticalmente. Screw Hole Multi Huecos de Instalacion: Washer Si los huecos de instalación están encajados M4&M5 Screw Hole en la parte posterior de la pantalla, utilice los tornillos Siempre.
-
Página 5: Liste Des Composantes
MV-TILT3B Manuel d'installation Pays d'origine: Chine Numéro de contact: 866-395-0370 Garantie: 5 ans Notes importantes • supporte un poids maximum de 90.72kgs (200 lb). • écrans plat LCD et Plasma de 32" à 55", réglage de l’inclinaison +5 ° / -15 •... - Página 6 Montage des supports d'affichage Note : Lors de la fixation de l’écran, s’assurer que les supports sont Mounting Screw dans la bonne direction et qu’ils M6&M8 sont alignés verticalement. Screw Hole Trous de fixation: Multi Washer M4&M5 Si les trous de montage sont encastrés Screw Hole dans le dos de l'écran, utilisez les buissons fournis.