socket when the device is not in use
or when you intend to clean it.
• Do not use this device with a dam-
aged cable or plug, or when in a
faulty condition. If the power cord
is damaged, it has to be replaced by
the manufacturer, a customer service
agency or an adequately qualified
person.
• Keep the power cord away from hot
surfaces. Never let the power cord
hang over the edge of a table.
• The device must not be kept or used
on or near hot surfaces
(such as, for example, hotplates) or
open gas flames.
• Use the product only for intended
applications.
• The introduction of any other ma-
terial, such as metal foils or other
18
English