English; Getting Started - Braun Satin Hair satinstyler EC 1 Manual De Instrucciones

English

Our products are engineered to meet the highest standards of
quality, functionality and design. We hope you thoroughly enjoy
your new Braun appliance.
Please read these use instructions carefully before use and keep
them for future reference.
Important
• Plug your appliance into an alternating current ( ) outlet only and
make sure that your household voltage corresponds to the
voltage printed on the appliance.
• This appliance must never be used near water (e.g. a filled
wash basin, bathtub or shower). Do not allow the appliance
to get wet. Always unplug it after use.
• For additional protection, it is advisable to install a residual
current device (RCD) with a rated residual operating current not
exceeding 30 mA in the electrical circuit of your bathroom. Ask
your installer for advice.
• This appliance is not intended for use by children or persons with
reduced physical, sensory or mental capabilities unless they are
given supervision by a person responsible for their safety.
• Keep out of reach of children.
• Be careful to avoid that the hot surfaces of the appliance get into
direct contact with the skin, in particular of the ears, face or neck.
• When hot, do not place on surfaces that are not heat-resistant.
• Do not wrap the mains cord around the appliance. Regularly
check the mains cord for wear of damage. If the cord is
damaged, stop using the appliance.
• If the complete display flashes, this indicates an internal error of
the appliance. In this case, take the appliance to a Braun Service
Centre for checking. Unqualified repair work can lead to extreme
hazards for the user.
• The appliance should be used on dry hair only.
Description
1 Cool tip
2 Tong with clamp
3 Ion nozzle
4 Tong opener
5 LC Display
6 Temperature selector (– / +)
7 Ion activator
8 On/off button
9 Swivel cord

Getting started

• Connect the appliance to an electrical outlet and push the on/off
button [8] for 1 second to turn it on.
• During heat-up, the display shows three flashing segments
(Fig. A).
• After approximately 45 seconds, the minimum styling tempera-
ture is reached and you can start using the appliance.
• Using the temperature selector [6], you can adjust the styling
temperature. There are 5 temperature levels represented by
ascending segments on the display. When changing the tempera-
ture, the segments will flash. The segments shine permanently
when the selected temperature is reached.
• We recommend the following temperature settings:
1 segment (min):
2 to 4 segments:
5 segments (max): for thick hair and professional use (Fig. C)
The higher the temperature, the better the curling result will be.
However, for better care of chemically treated hair, the tempera-
ture setting should be 3 segments maximum.
«satin ion» Technology
The «satin ion» technology produces a rich stream of satin ions that
envelop every single hair. The ions calm hair, reducing frizz and
static to reveal the hair's natural beauty and shine.
Press the ion activator [7] for one second. «satin ions» appears on
the display. This shows that the ion function is activated and that a
stream of invisible ions surrounds your hair while styling.
6
for fine hair (Fig. B)
for normal hair