Lavor Missouri Manual Del Usario página 13

LANCE AND NOZZLZ ASSEMBLY
Before using the high pressure cleaner, assemble the
lance onto the spray gun and the nozzle onto the lance
(fig. 3). To fit the lance to the gun, it is sufficient to insert
the threated end of the lance (See fig. 6a-4 pos. 1) into
the hole on the gun (See fig. 4 pos. 2); then screw the
lance as indicated by the arrow (A) till when you have
reached the complete coupling (See fig. 4).
GUN SAFETY DEVICE
Whenever you need to stop the machine, it is necessary
to use the safety lock (S) (fig. 5), placed on the gun, in
order to avoid fortuitous openings.
DETERGENT SUCTION
FILLING UP
Fill up the detergent tank with the suggested products,
suitable for the kind of washing to be carried out (fig.
1).
ATTENTION: make use only of liquid detergent,
do not absolutely use acid or too much alkaline
products.
We suggest you to make use of our products, which
have been studied for the use with washer machines.
ATTENTION: For proper use of the tank, do not
introduce flammable or chemically harsh
substances.
The adjusting head allow you to select water jet at
low and high pressure.
The pressure selection is carried out by rotating the
adjusting head. To increase the pressure, rotate the
adjusting head clockwise (fig. 6 Pos. A), to reduce
the pressure rotate it anti-clockwise (fig. 6 pos. B).
The detergent suction is automatic when the adjusting
head of the lance is rotate for low pressure operation
(anti-clockwise). When you start the machine, the
mixing of the detergent with the water is automatic
at the water passage.
A
S
A
GB
fig. 3
1
2
fig. 4
fig. 5
B
fig. 6
13