DELTACALOR SLIM C Manual De Usuario Y De Instalación página 43

e
l e C T r i C a l C o n n e C T i o n s
Electrical wiring must be installed by a qualified
professional technician.
An Idm<30 mA residual current device and a safety
device against overcurrent, corresponding to the
connection line characteristics, must be used to pro-
tect the power supply to the towel heater, in conform-
ity to standards in force.
Make sure the mains voltage effectively corresponds
to the one shown on the appliance, before use.
r
a n g e a n d d i m e n s i o n s
Models
TB048048ES
TB048048EK
Power
200 W
Width
This towel heater is fitted with class 1 immersion
heating element in water and glycol and must be
earthed.
The three cables must be coupled up in a terminal
box conforming to standards in force, or by using a
Schuko plug.
Single phase power supply 230 V~ 50Hz:
- Blue wire: Neutral
- Brown wire: Phase
- Green and yellow wire: Earth lead
Height Width
480 mm 480 mm
Depth
100 mm
Depth
8