Before Use; Operation; Charging The Torch - LIVARNO LUX HG07409 Instrucciones De Utilización Y De Seguridad

WEAR PROTECTIVE GLOVES! Leaked or damaged
batteries / rechargeable batteries can cause burns on
contact with the skin. Wear suitable protective gloves at
all times if such an event occurs.
This product has a built-in rechargeable battery which
cannot be replaced by the user. The removal or replacement
of the rechargeable battery may only be carried out by
the manufacturer or his customer service or by a similarly
qualified person in order to avoid hazards. When disposing
of the product, it should be noted that this product contains a
rechargeable battery.
In the event of a leakage of batteries / rechargeable
batteries, immediately remove them from the product to
prevent damage.
Note: Do not charge the torch 4 during use.
˜ Before use
Note: Remove all packaging materials from the product.
˜ Operation
˜ Charging the torch
Before using the product: The built-in rechargeable battery must
be fully charged.
To charge the torch 4 , only use power supplies with an
output voltage of 5 V and an output current of at least 1 A.
Connect the USB charging cable 10 with the Micro USB
socket 3 of the torch 4 .
Connect the other end of the USB charging cable 10 to a
USB power supply (not included in the scope of delivery).
During charging, the LED indicator light 5 flashes green. The
LED indicator light 5 lights up green as soon as the flashlight
4 is fully charged.
GB/MT 33