Description Of Symbols - Silverline 750W Manual Del Usuario

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instruction.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
For indoors use only!
T-130˚
Disconnect the plug from the power prior to clearing a blockage.
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
Do not touch the blades before the machine is disconnected from the
supply and the blades have come to a complete stop
Technical Abbreviations Key
V
~
A
n0
Hz
W, kW
/min or min -1
6
Volts
Alternating current
Ampere
No load speed
Hertz
Watt, kilowatt
(revolutions or reciprocation) per minute
Original Instructions
Specification
Voltage: ................................................................................. 230-240V~ 50Hz
Power: ..................................................................................................... 750W
No load speed: ..................................................................................2850min
Max air flow: .................................................................................... 235.8Ltr/s
Suction power: ...................................................................................0.135kPa
Dust collector capacity: .......................................................................... 128Ltr
Dust filtration level: ............................................................................G3 >5µm
Weight: ......................................................................................................27kg
Sound and vibration information:
Sound Pressure LPA: ........................................................................... 70dB(A)
Sound Power LWA: .............................................................................. 84dB(A)
Uncertainty K: ............................................................................................ 3dB
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
As part of our ongoing product development, specifications
of Silverline products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or misused tool,
may produce increased levels of noise and vibration. www.osha.europa.eu provides
information on sound and vibration levels in the workplace that may be useful to domestic
users who use tools for long periods of time.
-1