Gallagher S200 Instrucciones Para La Instalación página 7

3E4677 Gallagher S200 Solar Energizer User Manual
• Electric animal fences intended for deterring birds, household pet containment or training animals such as
cows need only be supplied from low output energizers to obtain sa sfactory and safe performance.
• In electric animal fences intended for deterring birds from roos ng on buildings, no electric fence wire shall
be connected to an earth stake. A warning sign shall be fi ed to every point where persons may gain ready
access to the conductors.
• Where an electric animal fence crosses a public pathway, a non-electrifi ed gate shall be incorporated in the
electric animal fence at that point or a crossing by means of s les shall be provided. At any such crossing, the
adjacent electrifi ed wires shall carry warning signs.
• Any part of an electric animal fence that is installed along a public road or pathway shall be iden fi ed by
electric fence warning signs (G6020) at regular intervals that are securely fastened to the fence posts or fi rmly
clamped to the fence wires.
• The size of the warning sign shall be at least 100mm x 200mm.
• The background colour of both sides of the warning sign shall be yellow. The
inscrip on on the sign shall be black and shall be either:
-the substance of "CAUTION: Electric Fence" or,
-the symbol shown:
• The inscrip on shall be indelible, inscribed on both sides of the warning sign and have
a height of at least 25mm.
• Ensure that all mains operated, ancillary equipment connected to the electric animal fence circuit provides
a degree of isola on between the fence circuit and the supply mains equivalent to that provided by the
energizer.
• Protec on from the weather shall be provided for the ancillary equipment unless this equipment is cer fi ed
by the manufacturer as being suitable for use outdoors, and is of a type with a minimum degree of protec on
IPX4.
This energizer complies with interna onal safety regula ons and is manufactured to interna onal standards.
Gallagher reserves the right to make changes without no ce to any product specifi ca on to improve reliability,
func on or design. E & OE.
The author thanks the Interna onal Electrotechnical Commission (IEC) for permission to reproduce Informa on from its
Interna onal Publica on 60335-2-76 ed.2.2 (2013). Annex BB-1.All such extracts are copyright of IEC, Geneva, Switzerland.
All rights reserved. Further informa on on the IEC is available from www.iec.ch. IEC has no responsibility for the placement
and context in which the extracts and contents are reproduced by the author, nor is IEC in any way responsible for the other
content or accuracy therein.
Save these instruc ons.
5 5