Picture Setting; Picture Menu - Furrion FDFS40M4A Manual De Instrucciones

Change Settings

Picture Setting

1. Press MENU button, the setup window will
appear on the screen.
key to highlight Picture mode.
2. Use
or
3. Use or to highlight the item you would
like to reset, then press
settings.
4. Press MENU to return to the previous menu
or press EXIT at any time to exit the setting.
Selects the display
Picture Mode
mode
Controls the brightness
Brightness
level of the picture
Controls the contrast
Contrast
level of the picture
Controls the color level
Color
of the picture
Tint Controls picture tint
Controls the sharpness
Sharpness
of the picture
Color
Selects the color mode
Temperature
Advanced Advanced picture
Settings settings
to select the
or

Picture Menu

Press or to select Power Saving / Standard / Dynamic, Soft or User
display modes.
Press or to change the brightness to desired level.
* Only adjustable after set "Picture Mode" as "User" mode.
Press or to change the contrast to desired level.
* Only adjustable after set "Picture Mode" as "User" mode.
Press or to change the color to desired level.
* Only adjustable after set "Picture Mode" as "User" mode.
Press or to change the tint to desired level.
* Only available under NTSC mode.
Press or to change the sharpness to desired level.
* Only adjustable after set "Picture Mode" as "User" mode.
Press or to select Normal, Warm or Cool.
Aspect
Noise Reduction
Dynamic
Contrast
Press or to select Wide, Zoom, Cinema or
Normal.
to select Middle, High, Off or Low.
Press or
to select On or Off.
Press or
19