EN
Put the BORT AktiVen
compression stockings on the table. Whilst
holding the shell with one hand, pull the
frame to its greatest possible length with the
other hand until the side locking mechanism
engages.
Grasp the compression stocking with both
hands at the upper edge so that the heel points
towards the body.
10
1
donning aid for medical
®
3
Place the shell in an upright, vertical position
and the frame at the rear of the table.
Then slip the compression stocking evenly over
the shell until the stocking's heel area is around
the upper edge of the shell. Recommendation:
For easier and energy-saving placement of the
stocking, use special BORT AktiVen
2
4
gloves.
®