Technical Specification - miniland baby Warmy Advanced Manual Del Usuario

6 MAINTENANCE
Please follow the instructions below:
· On the device (main body):
Always turn OFF and unplug before cleaning. Use a damp dishcloth to clean it.
· On the device (warming chamber):
According to the quality of the water used, over time a limescale deposit can build
up on the bottom of the heating chamber. You should regularly descale your bottle
warmer by pouring a mixture of 100 ml of hot water + 100 ml of white vinegar into
the heating chamber.
Leave this to act for approximately 30 minutes before emptying the chamber and
wipe with a damp cloth. Do not use detergent to clean the unit.
· Detachable accessories:
The plastic parts are dishwasher safe, however it is highly recommended to wash
by hand.

7 TECHNICAL SPECIFICATION

· CAR: voltage: 12VDC; consumption: 100W.
· HOME: voltage: 220-240VAC; frequency: 50 - 60Hz; consumption: 320W.
8 PRODUCT DISPOSAL INFORMATION
· Remember to dispose of the product responsibly.
· Do not mix products bearing the crossed -out bin symbol with your
general household waste.
· For the correct collection and treatment of these products take them
to the collection points designated by your local authority.
Alternatively contact the retailer who sold you the product.
ENGLISH