Optional Connections - DragonTouch K10 Manual Del Usuario

OPTIONAL CONNECTIONS

Connecting to a Computer
Connect the tablet to a computer to transfer files.
1. Connect your tablet to the computer.
With the included USB cable: Plug the small end of the cable into the USB 2.0 high speed
connector of the tablet. Plug the large end of the cable into an available USB 2.0 high
speed port on the computer.
2. When your tablet is connected, slide down the USB icon then touch icon USB
connected.
3. Mount the storage.
Tap button Transfer files (MTP) to mount the tablet's built-in storage. When it is mounted,
you can copy files to or from your tablet.
11
SPECIFICATIONS
Processor
MTK8163 (Quad-core ARM Cortex-A53 64-bit up to 1.3GHz)
RAM
2GB DDR3
Storage
16 GB flash built-in; Micro SD card slot (max.128GB supported)
Display
10.1'' 800*1280, Capacitive touchscreen
Wi-Fi Networking
IEEE 802.1 1 a/b/g/n
Audio Output
3.5mm headphone
PC Interface
USB 2.0 high speed
Built-in microphone
Additional Features
Front facing camera 2.0MP Rear camera 2.0MP
Bluetooth
4.0
Operating System
Android 8.1
Power
Rechargeable Li-poly battery Power Adapter (USB 5V, 2A)
Playback Time
Up to 6 hours music, 4 hours video, 4 hours web browsing
(hours)
TROUBLESHOOTING
1. Device doesn't power on.
• Reboot your device after charging it for 30 minutes.
• Shortly press your power button to check if it lights up in case your device is in sleep
mode.
• Press the power button for 20 seconds.
• Start a hard reset by pressing the reset button with a pin if there is reset button on your
actual device.
2X1W speaker
12