Sartorius YSB02 Instrucciones De Instalación página 3

English
Intended Use
The digital input/output module
converts serial control signals into
parallel control signals.
This module is designed for connection
to the RS-485 interface port on the
Combics 3 indicator. With this digital
I/O module, activation of servo-
components and process control tasks
can be carried out via a PLC, for
example, that sets or loads parallel
signals.
The YSB02 module has been prepared
at the factory for installation on a top-
hat rail.
The digital input/output module is
connected to the RS-485 interface on
the Combics 3 indicator using either
customer equipment or a connecting
cable available from Sartorius:
– YCC02-RELAIS01 for connection to
Combics 3 (CISL3), Option H4 (Filling
with Extras)
– YCC02-RELAIS02 for connection to
Combics 3 (CIS3), Option H4 (Filling
with Extras)
Note:
Before installing and using the digital
input/output module, make sure to
read the manufacturer's instruction
manual provided with the module.
PLC
7 inputs 8 outputs
YSB02
RS-485
Power supply
provided by
customer
(+10 V to
+30 V DC)
3