AMAZON COMMERCIAL B07RQWVPDT Manual Del Usuario página 6

Step 3:
INSTALL LATCH
Insert latch in hole keeping it parallel to face of door.
•
Outline face plate with pencil and remove latch.
•
Chisel 1/8" (3 mm) deep or until latch face is flush with door
•
edge.
Insert latch and tighten screws.
•
NOTICE
NOTICE
6
A
C
Make sure the latch is inserted with the word "TOP"
facing upward.
NOTICE LATCH BOLT BEVEL MUST BE FACING
THE SAME WAY THE DOOR CLOSES.
B
D