AMAZON COMMERCIAL B07RQWVPDT Manual Del Usuario página 8

Step 5:
REMOVING INSIDE TRIM
Insert tip of the knob removing tool into the hole on the bottom
•
of knob.
Pushing down on the locking pin, pull back on the knob,
•
remove the tool from hole and finish removing the knob.
Step 6:
ADJUSTMENT
Adjust the lock assembly so the latch hole is in the center of
•
the hole in the edge of the door by turning the face plate
clockwise or counter-clockwise.
Remove the lock assembly from the door.
•
8
Remove knob and face plate
Lock assembly
Latch hole