Bartscher 700298G Manual Del Usuario página 37

Defrosting
Automatic defrost
The device's automatic defrost cycle runs 4 times every 24 hours.
Manual defrost
When the cooling capacity decreases, e.g. after opening the door for a long time,
it is necessary to perform the manual defrosting. To start the defrosting, press the
button „ " and hold it pressed for 6 seconds.
The LCD defrost indicator „
Tips for user

To reduce energy loss during the cooling process, open the door for as short a time
as possible and as rarely as possible. Do not open the door too often.

Do not cover air inlet and outlet of the mini refrigerated display. The air must
circulate freely to ensure proper cooling.

The food stored inside the device must be kept at appropriate distance from one
another. Cooling capacity is reduced when they are placed too close together.

Adjust the height of shelves to the height of food containers or bottles.

Allow warm dishes to reach room temperature before placing them inside the device.

In the event of a sudden power failure, do not open the door unless necessary, to
avoid loss of cool air inside the refrigerated display.

After a power failure or removal of the plug, do not reconnect the device to the
power supply for at least 5 minutes.

If the device is to remain unused for a period of time, switch the device off via ON/OFF
switch and disconnect it from the power supply (pull the plug out the socket!).
" will come on.
- 33 -