Specifications; Product Specifications; General Recommendations; Emission Control - Crafstman 580.752060 Instrucciones De Uso

PRODUCT SPECIFICATIONS

Pressure Washer Specifications
Max Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,500 PSI
Max Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 GPM
Detergent Mix . . . . . . . . . . . . . . . . . . . . . . . . Use as directed
Water Supply Temperature . . . . . . . . . . Not to exceed 100°F
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 lbs.
Engine Specifications
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 in. (64 mm)
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 in. (50 mm)
Displacement . . . . . . . . . . . . . . . . . . . . . . . 9.8 cuin (161 cc)
Spark Plug
Resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . NGK BPR6ES
Set Gap To: . . . . . . . . . . . 0.028-0.031 in (0.70-0.80 mm)
Intake Valve Clearance . . . . . . . . . . . 0.15 ± 0.04 mm (cold)
Exhaust Valve Clearance . . . . . . . . . . 0.20 ± 0.04 mm (cold)
Fuel Capacity . . . . . . . . . . . . . . . . . . . . . 0.29 Gallons (1.1 l)

SPECIFICATIONS

GENERAL RECOMMENDATIONS

Regular maintenance will improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service dealer for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart.
NOTE: Once a year you should clean or replace the spark
plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.

EMISSION CONTROL

Maintenance, replacement or repair of the emission control
devices and systems may be performed by any non-road
engine repair establishment or individual.
15