Bond NorthWoods TableFire HYUTT50001-5 Manual Del Usuario página 4

Bol de fuego a gas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note:
SAFETY INFORMATION
Only use the regulator and hose assembly provided with this unit. Replacement parts must be supplied
directly by Bond Manufacturing Co., Inc.
Inspect the burner before use of this unit. If the burner shows any kind of damage, do not operate
the appliance. For assistance with repair or replacement of the burner or any other parts, call Bond
Manufacturing Co., Inc. at 1-866-771-BOND (2663) | Help available in English and Spanish Monday -
Friday, 8:00am - 4:30pm PST
NOTE: You must follow all steps to properly assemble this heating item. Make sure the gas
valve is turned "OFF" before assembling. Do NOT attempt to assemble without proper tools.
121.9 cm / 47.9 in
Min. Clearance
121.9 cm / 47.9 in
121.9 cm / 47.9 in
This is an umbrella hole table (not included) that with a hole on the tabletop to assemble the product.
The umbrella hole table size needs to meet the following requirements:
The length and width should not be shorter than 81.28 cm / 32 in.
The height should be lower than 101.6 cm / 40 in.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any parts are missing or damaged, do not
attempt to assemble the product.
Estimated assembly time: ___ minutes
Tools required for assembly (not included):
Bond Manufacturing Co., Inc. | Page 4
Min. Clearance
Min. Clearance
121.9 cm / 47.9 in
Min. Clearance
20
Combustible materials should not be within 183 cm / 72 in of
the top of the unit, or within 122 cm / 48 in around the entire
unit.
Phillips screwdriver

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1500181

Tabla de contenido