Wet/Dry Vacuum
CLEANING AND MAINTENANCE
CAUTION: Always be sure the Wet/Dry Vac is turned OFF and the charging
unit is unplugged before cleaning or attempting to store the item. NEVER
IMMERSE THE MOTOR in water or any other liquid. NEVER operate the
Wet/Dry Vac without the dust container and filter in place.
HOW TO CLEAN THE DUST CONTAINER
1.
Hold the vacuum with the air inlet pointing downward. Press the dust container
release button to remove the dust container.
2.
Remove the filter and the divider before emptying the dirt in the dust container in to
a trash receptacle or the liquid into a sink.
3.
Rinse the dust container and divider in clear water and let dry thoroughly.
4.
Shake the filter over the trash receptacle to remove dirt in the filter.
5.
Replace the filter in the divider and push the divider securely into the main body of
the dust container.
6.
Replace the dust container back onto the main unit securely.
7.
Use a soft damp cloth to wipe the outside of the main body and handgrip. Do not use
abrasive cleaners on any parts of the Wet/Dry Vac.
HOW TO CLEAR CLOGS
Low suction or poor pick up may be due to a clog in the air inlet or attachments. If you
notice a change in the sound of the motor or a reduction in performance, check for clogs
and remove right away. Always be sure that the Wet/Dry Vacuum is switched OFF before
attempting to remove a clog.
AFTER SALES SUPPORT
888-367-7373
MODEL: KB-8085
_________ ____
customer-service@wk-usa.com
PRODUCT CODE: 44876 03-2015
CLEANING AND MAINTENANCE
9