Hold; All On H Old; C All From H Old; Flash - THOMSON RCA 25205 Manual Del Usuario

Hold

Placing a Call on Hold
1. Press the Hold button. The indicator for the line on hold flashes blue.
2. Hang up or press another line button.
Releasing a Call from Hold
Press the line button for the call on hold. The phone automatically goes into
speakerphone mode.
NOTE: If you want to change modes, lift the handset to switch to the handset, or press the
Headset button to use the headset.

Flash

Use the Flash button to activate custom calling services such as Call Waiting, which is
available through your local telephone company.

Redial

To quickly redial the last number you dialed (up to 32 digits):
1. Pick up the handset, or press the Speaker or Headset button.
2. The line is selected automatically.
3. Wait for a dial tone.
4. Press the Auto Redial button.
Volume
The ringer, speaker, and handset/headset volumes can be set independently. Your
telephone is preset but may be set to individual taste.
Ringer Volume
While the phone is in idle mode, press the Vol + or Vol - button to enter the ringer
volume menu. You may choose from Level 1 to Level 6, or OFF.
1. Press the 3 and 4 button to select L1 or L2.
2. Use the Vol + or Vol - button to adjust the ring volume. The phone generates a
2-second long sample ring at the select setting for loudness verification.
Speakerphone, Handset, and Headset Volume
While using the phone press the Vol + or Vol - buttons to set the volume to a
comfortable level. The phone stores the setting when you release the button.
Telephone Operation
2