Connecting The Generating Set To Tower; Starting Up The Generating Set; Starting The Electrical Motor - Himoinsa Apolo 8000 Manual Del Usuario

3.4. Connecting the generating set to tower

Once you have verified the connexion and the proper fixing of the spotlights, we will connect the
generating set to the lighting tower.
In order to carry out this operation, get the extension cable that is in one of the side compartments
(1), and connect one of the ends to the corresponding power output located in the generating set
(2) control panel and the other end to the lighting tower (3).
2 3 4
1

3.5. Starting up the generating set

As shown in the start up procedure described in the instructions of the generating set.

3.6. Starting the electrical motor

In order to raise the mast you must connect the main switch at the tower control panel (panel located
in one of the side compartments)
This switch feeds the electrical motor of the Lighting Tower which will allow raising and unfolding the
mast in its all.
51