Publicidad
Idiomas disponibles
Idiomas disponibles
AXLE STANDS
˜ Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product.
Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to
the operating instructions and the safety advice below. Only use the product as instructed and only for the
indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone
else, please ensure that you also pass on all the documentation with it.
˜ Instructions
Please read the instructions carefully and follow the safety advice. To avoid personal and property
damage, use the product carefully and only for the intended use. Damage caused by incorrect handling
or non-observance of the instructions is not covered by the warranty.
IMPORTANT! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
˜ Intended use
Only for private use – jacking up a car for tyre changes.
˜ Technical specifications
Model number:
HG03066
Max. load:
2000 kg (per axle stand)
Hub height I:
24 cm
Hub height II:
26.7 cm
Safety instructions
Always check that the axle stands are in perfect working order. Never use damaged axle stands.
Use the axle stands only on a level, stable surface.
When jacking up a car, always use both axle stands. Never use single axle stand
when changing tyres.
Before first use: Familiarise yourself with the axle stands and the folding mechanism.
m
WARNING! Risk of injury! Ensure that the holding bolt and the safety pin are seated correctly.
Otherwise, the middle pole might fall freely through the middle tube.
m
WARNING! Always let the vehicle off the axle stands slowly and carefully.
18 GB/MT
Hub height III:
29.5 cm
Hub height IV:
32.2 cm
Hub height V:
35 cm
Hub height VI:
37.7 cm
Publicidad
