Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Getting Started
Step 1: Unpack all components from the shipping box. Please save
the original packaging material in case you ever need to return
the system since the Limited Warranty does not cover shipping
damages.
The shipping box should contain the following system
components:
iPod dock
Touch panel
iPhone adapter
Telescopic
Antenna
Remote control
Step 2: Remove the protection paper from the remote control
battery compartment.
Step 3: Connect the enclosed external telescopic antenna. You
will find the antenna connector in the Geneva Sound System back
Line In
Antenna connector
ON / OFF key
Display
Power cord
Line cable
AC plug
panel (see picture below).
Step 4: Connect the AC power cable to the AC power plug on the
back panel (see picture). Then connect the other end of the AC
power cable to an AC outlet. „12:00" will blink on the display,
indicating an invalid time setting.
Remote Control:
Treble control
Bass control
iPod
Fast reverse/
skip backward
Play / Pause
FM/
radio presets
Touch Panel:
Dock adapter
iPod Menu key
Fast reverse / skip
backward
Turn on the Geneva Sound System:
Press the
key on the remote control or touch the
the touch panel.
How to verify that the remote control works?
Every time a key is pressed on the remote control, a small red light
quickly lights up on the display.
Adjust the clock:
1. Press the
key on the remote control. The letter „C" should
start blinking on the display.
2. Use the
and
set the correct time.
3. Press
to complete the procedure.
Note: the clock remains valid for up to 1 hour of power loss.
4
Power On / Off
Volume control
FM Radio
Line in
Fast forward/
skip forward
Clock control keys
Power On / Off
Mode selector
iPod control and volume
Fast forward/skip
forward
Play / Pause
keys on the remote control or the wheel to
key on
Publicidad
Tabla de contenido
