WD Plus CSL 303674 Manual Del Usario página 9

4. Initial use
Take the device out of the package and remove all the packaging material.
1. Connect the receiver to any available USB port on your computer or gaming
console.
2. Wait for about five seconds and then press the "HOME" button to register
the Gamepad on the console. The LEDs of the Gamepad will flash during
the pairing process.
3. Once the pairing is complete, one of the LEDs stops flashing.
4. Pair the signal between the Gamepad and receiver once again. You can
reconnect the receiver and press the Home button again.
Thanks to Plug&Play, no separate driver installation is required.
Change mode
To change the input mode, press the Home button for about 3 seconds. You can
then change between X-input and direct input. Pressing the home button briefly
in "Direct Input" mode toggles between the digital mode (LED 1 is turned on) and
the analogue mode (LED 1 + 2 turned on).
X-input mode is used for most modern PC games.
In the X-input mode, you will see the gamepad as "XBOX360 controller".
5. Dual vibration function
The Gamepad has two strong vibration motors. The controls are represented more
realistically with the vibration effect.
Note: Please note that the vibration works only if the game or the program sup-
ports this function and the corresponding feature has been activated in the game
options.
English
9