Your Control Square Explained - Nanoleaf Canvas Manual Del Usario

1.4 Your Control Square Explained

The Control Square is the brain of the Nanoleaf Canvas system. The touch control buttons on the Control Square provide
convenient shortcuts to common commands. The Control Square can be powered by any Light Square in the layout or
directly from a power supply.
Advanced Button Controls
You can also use the Control Square's touch buttons for advanced commands—most commands can be executed by holding
buttons, or tapping two buttons at once. A full list of these shortcuts can be found in the table below.
Buttons
&
&
&
Nanoleaf Canvas User Manual | Your Control Square Explained
Next Rhythm Scene: Cycles through saved Rhythm Scenes
Shuffle Scenes: The Control Square comes with hundreds of preloaded
Scenes, and you can use the shuffle button to cycle through them. To
add a Scene to your favorites list for future use, see the instructions
below. Hold the Shuffle button to return to a previous random Scene.
Next Color Scene: Cycles through your list of saved Color Scenes
Dim
Brighten
Power ON/OFF
Gesture
Hold for 3s This opens a 30s window to pair a Nanoleaf Remote or third party App.
This saves the current Scene if it's not already saved. This is most useful for saving Scenes you like
Hold for 3s
when using the
Returns to the previous randomly selected Scene. Only the last 5 randomly loaded Scenes are
Hold for 3s
available. A flash of yellow on the panels will indicate that you are at the end of your browsing history.
Activate White Lighting mode. Cycle through the following preset white light modes:
Tap together once
Warm White (2700K), Reading Light (4000K), Daylight White (5000K).
Activate Power Diagnostic Mode: if you have more than 25 Light Squares connected to your Control
Hold down
Square, this enables or disables Power Diagnostic Mode. This mode helps you place additional power
together for 5s
supplies to optimize your Nanoleaf Canvas system. See section 4.1 for details.
Activate WiFi Hotspot Mode: this mode allows your Control Square to act as a local network hotspot
Hold down
without an Internet connection. With this mode active, you can use the Nanoleaf App to operate your
together for 30s
Nanoleaf Canvas without needing a router or access point. Note: Your Control Square will not be able
to download firmware updates, and Discover content from the community will be unavailable.
Action
.
05