Activating Power Diagnostic Mode Via Nanoleaf App; Led Statuses - Nanoleaf Canvas Manual Del Usario

1.5 Activating Power Diagnostic Mode via
Nanoleaf App
If you have more than 25 Light Squares in your Nanoleaf Canvas system, Power Diagnostic Mode helps you place power
supplies for optimal performance.

1.6 LED Statuses

There are 6 LED indicator lights on the Control Square, one behind each of the control buttons. These LEDs serve as feedback
for various actions, and are also used to communicate device status.
LED Flashing Sequence
Power button LED on (White)
Power button LED flashing white (4s on, 4s off)
Rhythm button LED on
Nanoleaf Canvas User Manual | Your Control Square Explained
iOS App | Open the More menu > Settings > Warnings > Power Limited
Android App | open the side menu > Settings > Warnings > Power Limited
*If your system has optimal power supply, these warnings will not show and
Power Diagnostic Mode is inaccessible. If you want to enable Power
Diagnostic Mode anyway, please use the button sequence on the Control
Square (see section 1.4).
Status
Device is ready to be configured on WiFi
Cannot connect to configured WiFi Network
Rhythm Scene is active
06