THOMSON RK250 Instrucciones De Funcionamiento página 18

Ocultar thumbs Ver también para RK250:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
• Manual scan for audio stations:
Briefly press the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons, until you have found the radio
station which you are looking for. If you keep one of the buttons pressed down, the device will search
to the previous, respectively next radio station.
• Preset station:
1. Press and hold the "AMS / MODE" button on unit for about 2-3 seconds to start the automatic
preset process.
2. Display will show the memory sequence number and radio stations will be automatically preset
into the sequence number (Note: Each sequence number means 1 preset station while during
automatic preset process.)
3. Once all the stations were automatic preset, press the "PRE.+ / FOLDER+" or "PRE.- / FOLDER- "
buttons to choose preset stations.
• FM / FM-Stereo reception
Select the MONO or STEREO mode for FM reception with the "STOP / FM ST.(MONO)" button.
Cassette Operation
Playing Cassettes
1. Select the CASSETTE mode with the "STANDBY / FUNCTION" button.
2. Press the STOP/EJECT button to open the cassette compartment.
3. Insert a recorded audio cassette into the compartment with the tape opening facing upwards and
the side you wish to listen to facing the front (full spool to the right). Then close the cassette
compartment again.
4. Press the PLAY key to listen to the tape.
5. With the STOP/EJECT key you can stop play-back.
6. Wind the tape forwards or backwards if necessary in the direction of the arrow keys.
F.FWD = forwards, RWD = reverse.
7. Always press the STOP/EJECT key when changing the direction or stopping the tape. This
prevents damage to the machine and the tape.
8. If the STOP/EJECT button is pressed again the flap of the cassette compartment opens.
9. In order to interrupt playback briefly, press the PAUSE button. Pressing again continues playback.
Playing CD / MP3
1. Select the CD mode with the "STANDBY / FUNCTION" button.
2. Open the CD compartment by pulling the lid upwards by the tab.
3. Insert an audio CD with the printed side facing upwards on to the central cone so that the CD clicks
into place and then close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks is shown in the display.
NOTE:
In the case of CDs in MP3 format the number of folders is briefly displayed at first.
5. The CD will play from the first title.
6. In order to remove a CD, please press the STOP button, open the CD compartment and lift the
CD out carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted the wrong way around, respectively if no disc is inserted, then the message "NO
" appears on the display.
• Playback of CDs produced by the user cannot be guaranteed due to the large variety of software
and CD media available.
- EN 6 -

Publicidad

Tabla de contenido
loading

Tabla de contenido