Programmed Play; Headphone Socket; Cleaning And Maintenance - THOMSON RK250 Instrucciones De Funcionamiento

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the "STOP" button.
2. Press the "AMS / MODE" button. "P01" (Storage space) and the notification "PROG" will appear
in the display.
Use the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons to select the desired track and then
press the "AMS / MODE" button again.
The display changes to memory slot P02.
3. Select the next track with the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons and press the
"AMS / MODE" button again. Repeat the procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be programmed has been reached "FUL" flashes in the display.
4. Press the "PLAY / PAUSE / CLOCK" button. The playback starts.
The notification "PROG" will appear additionally in the display.
5. Press once the button to stop the playback while retaining the program.
6. To play the programmed back again, press the "PLAY / PAUSE / CLOCK" button.
7. To delete the program, press the "STOP" button twice. The notification "PROG" will disappear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in MP3 format. The device also supports all
standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 99 track scan be compressed and stored on these
CDs. Your machine detects an MP3 CD automatically (the total number of tracks and MP3s appears
in the display). If you would like to play one of these CDs, proceed as described under "Playing CDs/
MP3". Tracks can be programmed as described under "Programmed Play".
AUX IN socket
Via this socket you can also hear the sound of other playback devices such as MP3 players, CD
players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX-IN socket.
2. Select the AUX IN mode with the "STANDBY / FUNCTION" button.
3. You will hear the sound playback from the external device through the loudspeakers. You may
adjust the volume with "VOLUME+" & "VOLUME-" buttons. The CD buttons are not functional.
4. For the remaining procedure please see the operating instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable level.

Headphone socket

To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the headphones
socket on the back of the system. The speakers will then be muted.
NOTE:
Adjust the volume of the external device to a comfortable level.

Cleaning and Maintenance

WARNING:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly damp cloth without any additives.
- EN 8 -