john deer MX40905 Instrucciones De Instalación página 4

Picture Note: Viewed from right front of deck
4. Install each half of shield (C) and (D) on the 62C deck
only, over the front indentation of the deck using two M8x25
bolts.
F
E
Picture Note: Deck not shown.
5. Secure M8x25 bolts (E) through the mower deck lip and
shield and into the clip nuts (F) already on the shield.
Tighten to 20 N•m (15 lb-ft).
C
D
MX31825
MX31827
F
4 M159220 H8